 |
T10
Sonnen
Product Introduction
T10 Chlorine ion potentiometric titrator，adopt second derivative method automatically determine end point of the titration, then caculate the content of chloride ions by the consumption of titrant. This test method is more precise and more reliable than general potentiometry and titration method.
Product Features
Building Block Design， T01 titron、T11E Electric Potential board、T11C color card、T02 magnetic stirrer can be willfully combinate or individually work. Concerning the separate use, please refer to the details of T03(which contains T01 & T02);
High brightness color touch screen(480 X 320 pixels)，individualization English operation interface， can set 12 graphical shortcut keys;
English and Chinese operation interface are alternative, Print interface reserved;
Intuitional“Building Block”flexible combination，operator can select the relative titration station and function according to actual need, and upgrade anytime;
Host bits can control twelve titron of T01 by bluetooth;
Host can connect to PC by WLAN;
The titration unit of T03 can work individually, mouse control titration;
The alternative communication interfaces: two USB interfaces、two RS232 interfaces、CAN bus interface、WLAN interface;
Different combination meet different clients’ demand;
Application Scope
Determinate the content of chlorine ion of various industries
Technical Parameters: | |
electrode interface for potential measurement | 2-4 |
mV Measuring range | ±2,000mV |
mV Resolution | 0.1mV |
Maximum possible error | 0.2mV |
Buret driver | 1/60000step |
Maximum possible error | ±0.2%(20ml) |
Emptying time and full filling time of buret | 30seconds(100% peak flow rate) |
polarized electrode interface | 2 |
reference electrode interface | 2 |
CI lowest limit of detection | 0.1mg |
Dimentions of host | 200 X 200 X 260(mm) |
Dimentions of titration module | 70 X 200 X 160(mm) |
Weight(standard configuration) | About 4.3kg |
Note: Parameters may be updated, please in kind prevail.
Product Introduction
T10 Chlorine ion potentiometric titrator，adopt second derivative method automatically determine end point of the titration, then caculate the content of chloride ions by the consumption of titrant. This test method is more precise and more reliable than general potentiometry and titration method.
Product Features
Building Block Design， T01 titron、T11E Electric Potential board、T11C color card、T02 magnetic stirrer can be willfully combinate or individually work. Concerning the separate use, please refer to the details of T03(which contains T01 & T02);
High brightness color touch screen(480 X 320 pixels)，individualization English operation interface， can set 12 graphical shortcut keys;
English and Chinese operation interface are alternative, Print interface reserved;
Intuitional“Building Block”flexible combination，operator can select the relative titration station and function according to actual need, and upgrade anytime;
Host bits can control twelve titron of T01 by bluetooth;
Host can connect to PC by WLAN;
The titration unit of T03 can work individually, mouse control titration;
The alternative communication interfaces: two USB interfaces、two RS232 interfaces、CAN bus interface、WLAN interface;
Different combination meet different clients’ demand;
Application Scope
Determinate the content of chlorine ion of various industries
Technical Parameters: | |
electrode interface for potential measurement | 2-4 |
mV Measuring range | ±2,000mV |
mV Resolution | 0.1mV |
Maximum possible error | 0.2mV |
Buret driver | 1/60000step |
Maximum possible error | ±0.2%(20ml) |
Emptying time and full filling time of buret | 30seconds(100% peak flow rate) |
polarized electrode interface | 2 |
reference electrode interface | 2 |
CI lowest limit of detection | 0.1mg |
Dimentions of host | 200 X 200 X 260(mm) |
Dimentions of titration module | 70 X 200 X 160(mm) |
Weight(standard configuration) | About 4.3kg |
Note: Parameters may be updated, please in kind prevail.
